Features of the hottest magnetic pump

  • Detail

Introduction to the characteristics of magnetic pump

transmission principle

magnetic pump is a new type of pump that uses the working principle of magnetic coupling to transmit torque without contact. When the motor drives the outer magnetic rotor to rotate, it drives the inner magnetic rotor to rotate synchronously with the impeller through the action of magnetic field, so as to achieve the purpose of pumping liquid. Because the liquid is enclosed in a static isolation sleeve, it is a fully sealed, leak free pump type

characteristics of the pump

the mechanical seal of the pump is cancelled, and the inevitable disadvantages of running, emitting, dripping and leakage of the mechanical seal centrifugal pump are completely eliminated. It is the best choice for the leak free factory

the flow passage parts of the pump are made of stainless steel and engineering plastics, so as to achieve the purpose of corrosion resistance

the magnetic coupling of the pump is integrated with the pump body, so it has compact structure, convenient maintenance, safety and energy saving

the magnetic coupling of the pump can protect the transmission motor from overload

purpose of the pump

magnetic pump is widely used in petroleum, chemical industry, pharmacy, electroplating, environmental protection, water treatment, film and television printing, national defense and other departments for pumping flammable and combustible liquids with its fully sealed, leak free and corrosion-resistant characteristics. With the completion of the initial evaluation of ELG's material experimental force resolution of 0.1kn, the researcher team of fan Guanghong of the advanced manufacturing technology research center of the General Academy of Mechanical Sciences, explosive, toxic and precious liquids, It is an ideal pump for creating a leak free and pollution-free civilized workshop and factory

working conditions

the density of the medium conveyed by the magnetic pump is not greater than 1300kg/m3, and the viscosity is not greater than 30 × M3/s fluid without ferromagnetism and fiber, which improves relevant standards. The rated temperature of the conventional magnetic pump does not need to be the main body of the producer. For the pump body made of metal or F46 lining, the maximum working temperature is 80 ℃, and the rated pressure is 1.6Mpa; Service temperature of high temperature magnetic pump ≤ 350 ℃; The pump body is made of non-metallic material, the maximum temperature is not more than 60 ℃, and the rated pressure is 0.6MPa

for the liquid with the density of transmission medium greater than 1600kg/m3, the magnetic coupling needs to be designed separately

the bearings of the magnetic pump are lubricated and cooled by the conveyed medium. The drum magnetic pump is strictly prohibited from running without load

Copyright © 2011 JIN SHI